Author Index

A

  • Adlnasab, Laleh Biodegradable colorimetric sensor based on starch/Alizarin Red S for naked-eye detection of free formaldehyde content in hair care products [Volume 1, Issue 1, 2022, Pages 18-24]
  • Ahmadi, Jamal Evaluation of internal curing impact on the mechanical properties and durability of high-performance concretes [Volume 1, Issue 4, 2023]
  • Ahmadi, Sara Effect of type and dosage of alkaline activators on the mechanical properties of alkali-activated slag concrete complied with ASTM C150 [Volume 1, Issue 1, 2022, Pages 25-31]
  • Alaii Rouzbahani, Zahra To investigate the effect of long-term storage on the physicochemical properties of honey [Volume 1, Issue 3, 2023]
  • Aminpoor, Mozhgan Biodegradable colorimetric sensor based on starch/Alizarin Red S for naked-eye detection of free formaldehyde content in hair care products [Volume 1, Issue 1, 2022, Pages 18-24]
  • Ansari, Hamid Toward a different aspect of polymer matrix friction composite worn surface structures [Volume 1, Issue 2, 2023]

B

  • Belgheisi, Saba Investigation, identification and determination of natural coloring compounds in black tea [Volume 1, Issue 2, 2023]

D

  • Dastmalchi, Farnaz Investigation, identification and determination of natural coloring compounds in black tea [Volume 1, Issue 2, 2023]

E

  • Ezoddin, Maryam Biodegradable colorimetric sensor based on starch/Alizarin Red S for naked-eye detection of free formaldehyde content in hair care products [Volume 1, Issue 1, 2022, Pages 18-24]

F

  • Faraji, Mohammad Investigation, identification and determination of natural coloring compounds in black tea [Volume 1, Issue 2, 2023]
  • Faraji, Mohammad Investigating the amount of coumarin in cinnamon samples as an indicator of safety and authenticity by liquid chromatography [Volume 1, Issue 3, 2023]

G

  • Goharrokhi, Ali The effect of transverse reinforcement corrosion on the axial bearing capacity of reinforced concrete columns [Volume 1, Issue 3, 2023]

H

  • Hajizadeh, Masoumeh Transformation in the quality of lexicography with the entry of international standards (ISO’s documents (into this field: a case study of English, Persian and Arabic dictionaries [Volume 1, Issue 4, 2023]
  • Hassani, Kamran A comparative numerical simulation of the electrokinetic micromixers [Volume 1, Issue 2, 2023]
  • Hassani, Kamran Effect of pedicle-screw fixation on the biomechanics of the lumbar spine: A Case Study finite element analysis [Volume 1, Issue 3, 2023]
  • Heydari, Payman A New Approach of System Engineering to Medical Device Lifecycle Management [Volume 1, Issue 2, 2023]

J

  • Jalili, Maryam To investigate the effect of long-term storage on the physicochemical properties of honey [Volume 1, Issue 3, 2023]

K

  • Karami Osboo, Rouhollah Comparing of two different detection methods (HPLC and LC-MS/MS) for the determination and confirmation of ochratoxin A in liquorice extract powder [Volume 1, Issue 1, 2022, Pages 38-43]
  • Karimi, Hajir Effect of pedicle-screw fixation on the biomechanics of the lumbar spine: A Case Study finite element analysis [Volume 1, Issue 3, 2023]
  • Katani Shooshtari, Mohsen Experimental Investigation of Air Pressure Drop Variations on Cooling Performance in Engine Radiators [Volume 1, Issue 4, 2023]
  • Kenarkoohi, Karim Assessing the risk of designing a capacitor waveform recorder system using the fMEA method in order to reduce costs [Volume 1, Issue 2, 2023]
  • Khakifirooz, Alireza A Case Study on National Quality Infrastructure in Iran and Its ranking in The Global Quality Infrastructure Index (GQII) [Volume 1, Issue 2, 2023]
  • Khaleghi, Mahroo Experimental study and comparative assessment on heat stabilized UPVC parts based on alternative standard test methods [Volume 1, Issue 1, 2022, Pages 32-37]

M

  • Mahmoudi-Meymand, Masoumeh Investigating the amount of coumarin in cinnamon samples as an indicator of safety and authenticity by liquid chromatography [Volume 1, Issue 3, 2023]
  • Mazaheri, Mansooreh Comparing of two different detection methods (HPLC and LC-MS/MS) for the determination and confirmation of ochratoxin A in liquorice extract powder [Volume 1, Issue 1, 2022, Pages 38-43]
  • Mobashery, Ayda The effect of transverse reinforcement corrosion on the axial bearing capacity of reinforced concrete columns [Volume 1, Issue 3, 2023]
  • Momeni, Masoumeh A Packet Truncation Mechanism in an Approximate Network on Chip [Volume 1, Issue 4, 2023]
  • Movahedi, Farnaz Biodegradable colorimetric sensor based on starch/Alizarin Red S for naked-eye detection of free formaldehyde content in hair care products [Volume 1, Issue 1, 2022, Pages 18-24]
  • Movahedi, Mohammad Mehdi A New Approach of System Engineering to Medical Device Lifecycle Management [Volume 1, Issue 2, 2023]
  • Movahedi, Mohammad Mehdi The Importance of Calibration Process for Medical Devices [Volume 1, Issue 4, 2023]

N

  • Nayebpashaee, Nasim An experimental study on the thermophysical properties of Al2O3-TiO2/ Ethylene Glycol-Water hybrid nanofluid at different concentrations and temperatures [Volume 1, Issue 1, 2022, Pages 8-17]
  • Nazi, Malihe Innovation Promotion through Standards Development [Volume 1, Issue 3, 2023]
  • Nouri Kamari, Majid Toward a different aspect of polymer matrix friction composite worn surface structures [Volume 1, Issue 2, 2023]

P

  • Panahi, Ali Reza Evaluation of internal curing impact on the mechanical properties and durability of high-performance concretes [Volume 1, Issue 4, 2023]
  • Parand, Fereshteh Azadi Implementation of Blockchain Standards for Compliance and Trust in Medical Implants Supply Chain [Volume 1, Issue 1, 2022, Pages 1-7]
  • Parsaei, Hossein A New Approach of System Engineering to Medical Device Lifecycle Management [Volume 1, Issue 2, 2023]

R

  • Rahmani, Anosheh To investigate the effect of long-term storage on the physicochemical properties of honey [Volume 1, Issue 3, 2023]
  • Ramezankhani, milad Experimental Investigation of Air Pressure Drop Variations on Cooling Performance in Engine Radiators [Volume 1, Issue 4, 2023]
  • Rashidi, Ladan Effect of cooking time and temperature on vitamin D3 amount in the fortified sunflower oil [Volume 1, Issue 3, 2023]
  • Rashidi Nodehd, Hamid Effect of cooking time and temperature on vitamin D3 amount in the fortified sunflower oil [Volume 1, Issue 3, 2023]

S

  • Saeedi Razavi, Behzad The effect of transverse reinforcement corrosion on the axial bearing capacity of reinforced concrete columns [Volume 1, Issue 3, 2023]
  • Saeedi Razavi, Behzad Evaluation of internal curing impact on the mechanical properties and durability of high-performance concretes [Volume 1, Issue 4, 2023]
  • Shahbazian, Reza Enhancing IoT Security through Standardization: A Review [Volume 1, Issue 4, 2023]
  • Share Pasand, Mohammad Mahdi Standardization challenges in the IOT and AI era [Volume 1, Issue 2, 2023]
  • Share Pasand, Mohammad Mahdi Uncertainty Sources in Observer-based Power Harmonics Measurement [Volume 1, Issue 3, 2023]
  • Shilchi, Patrishia Investigating the amount of coumarin in cinnamon samples as an indicator of safety and authenticity by liquid chromatography [Volume 1, Issue 3, 2023]
  • Shojaee AliAbadi, Mohammad Hossein Comparing of two different detection methods (HPLC and LC-MS/MS) for the determination and confirmation of ochratoxin A in liquorice extract powder [Volume 1, Issue 1, 2022, Pages 38-43]
  • Shojaei, Shahrokh A comparative numerical simulation of the electrokinetic micromixers [Volume 1, Issue 2, 2023]
  • Shojaei, Shahrokh Effect of pedicle-screw fixation on the biomechanics of the lumbar spine: A Case Study finite element analysis [Volume 1, Issue 3, 2023]

T

  • Tamtaji, Mostafa Assessing the risk of designing a capacitor waveform recorder system using the fMEA method in order to reduce costs [Volume 1, Issue 2, 2023]
  • Tavakoligolpaygani, Ali Implementation of Blockchain Standards for Compliance and Trust in Medical Implants Supply Chain [Volume 1, Issue 1, 2022, Pages 1-7]
  • Tavakoli Golpaygani, Ali A Case Study on National Quality Infrastructure in Iran and Its ranking in The Global Quality Infrastructure Index (GQII) [Volume 1, Issue 2, 2023]
  • Tavakoli Golpaygani, Ali A New Approach of System Engineering to Medical Device Lifecycle Management [Volume 1, Issue 2, 2023]
  • Tavakoli Golpaygani, Ali A comparative numerical simulation of the electrokinetic micromixers [Volume 1, Issue 2, 2023]
  • Tavangar, Reza Toward a different aspect of polymer matrix friction composite worn surface structures [Volume 1, Issue 2, 2023]
  • Tehrani, Pedram A comparative numerical simulation of the electrokinetic micromixers [Volume 1, Issue 2, 2023]
  • Tehrani, Pedram Effect of pedicle-screw fixation on the biomechanics of the lumbar spine: A Case Study finite element analysis [Volume 1, Issue 3, 2023]