Advances in the Standards & Applied Sciences - Articles List

Main Subjects = Engineering & Technology

The Importance of Risk Management for Medical Devices

Volume 2, Issue 2, March 2024, Pages 1-3

10.22034/asas.2024.413019.1035

Marzieh Reza; Ali Tavakoli Golpaygani

Modeling and Biomechanical Analysis of Keratoconus

Volume 2, Issue 2, March 2024, Pages 30-47

10.22034/asas.2024.440836.1051

seira salimi; Ali Tavakoli Golpaygani; Kamran Hassani

Fault Tolerant and Congestion-Aware Routing Algorithm in a Partially Connected 3D Network on Chip

Volume 2, Issue 2, March 2024, Pages 58-64

10.22034/asas.2024.448026.1054

Sina yousefisadr; majid nouri

Book: Standards and standardization in electrical industry

Volume 2, Issue 2, March 2024

10.22034/asas.2024.441138.1052

Morteza Jalilipour; Seyed Arash Hosseini Aghozbani

Criminal Activity and Environmental Impact as Cryptocurrency Concerns

Volume 2, Issue 1, December 2023, Pages 1-3

10.22034/asas.2023.429605.1048

Sara Tavakoligolpaygani

Interoperability and Standards in Blockchain-based EHR

Volume 2, Issue 1, December 2023, Pages 4-12

10.22034/asas.2023.420797.1043

Hossien Aghahosseini; Mehdi Sakhaei-nia

Designing, Programming and Feasibility study of a Paddle Wavemaker to increase quality and decrease production costs

Volume 2, Issue 1, December 2023, Pages 33-37

10.22034/asas.2023.414752.1038

Karim Kenarkoohi; Ruhollah Jafari; Mostafa Tamtaji

The Importance of Calibration Process for Medical Devices

Volume 1, Issue 4, September 2023

10.22034/asas.2023.409979.1030

Mohammad Mehdi Movahedi

Enhancing IoT Security through Standardization: A Review

Volume 1, Issue 4, September 2023

10.22034/asas.2023.411968.1032

Reza Shahbazian

Evaluation of internal curing impact on the mechanical properties and durability of high-performance concretes

Volume 1, Issue 4, September 2023

10.22034/asas.2023.379163.1019

Ali Reza Panahi; Jamal Ahmadi; Behzad Saeedi Razavi

Experimental Investigation of Air Pressure Drop Variations on Cooling Performance in Engine Radiators

Volume 1, Issue 4, September 2023

10.22034/asas.2023.417332.1042

majid nouri; milad Ramezankhani; Mohsen Katani Shooshtari

A Packet Truncation Mechanism in an Approximate Network on Chip

Volume 1, Issue 4, September 2023

10.22034/asas.2023.412533.1034

Sina yousefisadr; Masoumeh Momeni

Effect of pedicle-screw fixation on the biomechanics of the lumbar spine: A Case Study finite element analysis

Volume 1, Issue 3, June 2023

10.22034/asas.2023.406496.1026

Kamran Hassani; Hajir Karimi; Shahrokh Shojaei; Pedram Tehrani

View Article

The effect of transverse reinforcement corrosion on the axial bearing capacity of reinforced concrete columns

Volume 1, Issue 3, June 2023

10.22034/asas.2023.384957.1020

Behzad Saeedi Razavi; Ali Goharrokhi; Ayda Mobashery

Uncertainty Sources in Observer-based Power Harmonics Measurement

Volume 1, Issue 3, June 2023

10.22034/asas.2023.407107.1027

Mohammad Mahdi Share Pasand

Standardization challenges in the IOT and AI era

Volume 1, Issue 2, April 2023

10.22034/asas.2023.403442.1023

Mohammad Mahdi Share Pasand

Assessing the risk of designing a capacitor waveform recorder system using the fMEA method in order to reduce costs

Volume 1, Issue 2, April 2023

10.22034/asas.2023.370740.1018

Karim Kenarkoohi; Mostafa Tamtaji

A New Approach of System Engineering to Medical Device Lifecycle Management

Volume 1, Issue 2, April 2023

10.22034/asas.2023.346152.1004

Mohammad Mehdi Movahedi; Ali Tavakoli Golpaygani; Hossein Parsaei; Payman Heydari

A comparative numerical simulation of the electrokinetic micromixers

Volume 1, Issue 2, April 2023

10.22034/asas.2022.346729.1005

Kamran Hassani; Shahrokh Shojaei; Pedram Tehrani; Ali Tavakoli Golpaygani

Toward a different aspect of polymer matrix friction composite worn surface structures

Volume 1, Issue 2, April 2023

10.22034/asas.2023.401033.1022

Reza Tavangar; Hamid Ansari; Majid Nouri Kamari

Advances in the Standards & Applied Sciences

Journal Archive

Volume 2 (2023-2024)

Volume 1 (2022-2023)